251HT E - MANUAL SECTIONING MACHINE ON VERTICAL AXLE
Manual sectioning machine on vertical axle.
Send me more info for the product :251HT E - MANUAL SECTIONING MACHINE ON VERTICAL AXLE
You must fill all fields
- 5mm thickness Iron frame, welded, stabilized sand-blasted, then worked to have a perfect axles squareness.
- Inside painted with a special anticorrosive treatment; externally light blue RAL 5012, other colours on request.
- Inside components in stainless steel, bronze and special aluminum.
- Air system for the spindle cooling and the separation of the coolant in the rotation area of the front spindle bearings.
- Watertight Spindle and motor Assembly.
- Work-table with M8 T-slots to clamp irregular workpieces or to fix the vice.
- Vertical grinding wheel arm movement by means of a servo pneumatically assisted external lever (or, as an alternative, vertical grinding wheel arm movement by means of an external hand-wheel).
- Panel control with low voltage.
- Safety systems following CE rules.
- Interlocked cover-guard safety micro-switch, with possibility to be opened only in case movements are completely stopped and steady.
- Cooling system managed by a closed-cycle electric pump with three ways tap to wash the machine inside.
- Fitted to connect to a steam aspirator.
- Support machine with wheels and adjustable feet to position and house the ATF 80 tank.
- ATF 80, 80l auxiliary stainless steel tank with settling, pump and vertical stainless steel filter. All assembled on wheels.
- Variable speed 0 – 4400min-1.
- Automatic vertical axle.
- MSC 60: Single wedge vice.
- MDC 60: Double wedge vice.
- MSP 60: Single pneumatic vice.
- MDP 60: Double pneumatic vice.
- TG 250: Turning table diameter 250mm with M8 T-slots and clamps.
- TTL 200: Lateral sliding table with 80mm. stroke.
- VPL 253: Auxiliary tank with cross-support for long workpieces.
- Special vices on request.
OTHER OPTIONAL DEVICES ON REQUEST
- Ø GRINDING WHEEL
- POWER MOTOR
- STANDARD VOLTAGE
- 400V - 50Hz - THREE-PHASE
- FIXED SPEED
- GRINDING WHEEL ARM MOVEMENT
- VERTICAL SET ON LINEAR GUIDES
- VERTICAL STROKE
- MAX DIMENSIONS TO CUT Ø
- CUT MAX DIMENSIONS
- 105 X 105mm
- WEIGHT WITH SUPPORT
- DIMENSIONS WITH SUPPORT
- 67 X 103 X H 170cm